Black Widow Security BW X-Z Series Instrukcja Instalacji Pobierz pdf (Strona 4)

CONNECTOR PIN NUMBERS AND WIRE COLOR CODES

10-PIN HARNESS

# WIRE COLOR FUNCTION NOTES

1) White Ignition Connect to a source of TRUE IGNITION, a wire that is

hot in both the RUN and START positions.

2) Red +12 VDC Main Power. Connect this wire to the POSITIVE

terminal of the vehicle’s battery, with the supplied

fuse installed at the

BATTERY END of this wire.

3) Brown Starter Negative output to the Starter Interrupt relay.

Interrupt (–) See Wiring diagram for connections.

4) Black Ground Connect this wire to a clean, solid GROUND.

Do Not

confuse this wire with the short, black antenna wire.

Do Not Ground The Antenna Wire!

5) Orange Channel 2 Negative output when Button #2 of the transmitter is

pressed for 3 seconds. See the diagram on Page 5.

2-PIN VALET/OVERRIDE PLUG-IN CONNECTORS:

# PLUG COLOR FUNCTION

1) Blue Valet Override Plug-in the Blue 2- pin connector for the VALET switch

Switch to the Blue receptacle on the circuit board.

2-PIN LED PLUG-IN CONNECTORS:

# PLUG COLOR FUNCTION

1) Red LED Plug-in the Red 2- pin connector for the LED

to the Red receptacle on the circuit board.

3-PIN DOOR LOCK PLUG-IN CONNECTOR:

# WIRE COLORS FUNCTION

1) Green Door Negative output pulse to door LOCK circuit. See

Lock (–) door lock wiring diagrams on Page 5 for connections.

2) Red (+) Optional 12 V Output.

3) Blue Door Negative output pulse to door UNLOCK circuit.

Unlock (–) See door lock wiring diagrams on Page 5 for connections.

2-PIN ACCESSORIES PLUG-IN CONNECTOR :

# FUNCTION

1) Red 3rd Channel See diasgram on page 5.

2) White/Yellow Dome light output See diasgram on page 5.

INSTALLATION MANUAL

BW-650 KEYLESS ENTRY

Please read this Black Widow manual carefully before attempting to install this system.

• BLACK WIDOW •

INSTALLATION MANUAL

1 2 3 4 5 6 7

Brak uwag

Black Widow Security BW X-Z Series Instrukcja Instalacji Strona 4