Black Widow Security BW X-Z Series Instrukcje Operacyjne Strona 16

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 24
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 15
16
SYSTEM PROGRAMMING
Entering Programming
To enter System Programming
1. Turn on ignition.
2. Within 5 seconds, press valet the proper
number of times for the desired mode:
5 presses = Alarm Programming
10 presses = Remote Start Programming
The siren will chirp to indicate
programming mode entered:
5 chirps = Alarm Mode
10 chirps = Remote Start Mode
3. Press the valet switch the number times
equal to the Feature you want to change.
The siren will chirp each time the valet
switch is pressed. A long chirp is equal to
5 presses.(Example:step 7 = 1 long chirp
and 2 short chirps.)
4. Within 5 seconds, press the transmitter
button corresponding to the desired
operating mode for that Feature.
The siren will chirp either 1, 2, 3, or 4
times to indicate the button setting.
5. Repeat steps 3 and 4 to change additional
features.
6. Turn off ignition to save changes.
Complete Default Reset
Follow this procedure to set the Programming
Features to factory default settings.
1. Enter Alarm or Remote Start Feature
program mode.
2. After entering programming mode, press
Transmitter Button 1.
The siren will chirp once indicating the
reset signal was received.
All Programming options are now set to
factory default settings.
3. Turn ignition off.
Alarm Programmable Features
1. Auto Rearm. Automatically rearms the
system in case of accidental disarming. The
system must be armed for at least 10 seconds
before disarming, and the hood/trunk must not
be opened or Auto Rearm will be bypassed.
Auto Rearm with Lock will also lock the doors
upon rearming.
2. Blue Wire Programming. Selects between a
20 or 30 second output after disarming for
Dome light operation (default), and a 20 or 30
second output after arming for window roll-up.
3. Ignition Lock/Unlock. Automatically locks
the doors when ignition is turned on and
ALARM PROGRAMMABLE FEATURES
Step Function Button 1 Button 2 Button 3 Button 4
1. Auto Rearming Off On/No Lock On/Re-Lock
2. Blue Wire Activation Disarm 20s Disarm 30s Arm 20s Arm 30s
3. Ignition Lock/Unlock Brake/On On/On On/Off Off/Off
4. Door Lock/Unlock Pulse 1secL/1secUL 3secL/3secUL 1secL/1secULx2 30secL/1secUL
5. Passive Arm Locking No Lock Lock
6. Override Mode No PIN Code PIN Code
7. Open Door Report 60 seconds Instant 30 seconds 45 seconds*
8. Siren or Horn Mode Siren Horn
9. Auxiliary Output Timing Momentary 10s Timed 30s Timed Latched
10. Starter Defeat Relay Normally Closed Normally Open
11. Anti-Carjack Mode Off On
12. Trunk Disarm Feature Off On
7250 rev 2 9-23.qxd 9/24/2004 12:54 PM Page 16
Przeglądanie stron 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Komentarze do niniejszej Instrukcji

Brak uwag