Black Widow Security BW FM 250 Instrukcja Instalacji Pobierz pdf (Strona 4)

4

Using Valet/Override Switch

Valet Mode: If the system is pro-

grammed to passively arm (dip switch #4

On), and you wish to keep system from

arming but wish to retain keyless entry

features: 1. Disarm the system, 2. Turn

ignition to on, 3. Press and hold

valet/override switch for approximately 3

seconds, 4. LED will turn on solid.

To exit Valet mode: Repeat procedure,

LED will turn off momentarily, siren will

chirp twice.

Emergency Override: If you lose your

remote or it becomes inoperable, and

system is armed:

1. Open door and enter

vehicle (Siren will sound, lights will flash).

2. Turn ignition key to on, 3. Press the

override switch,

4. System will disarm,

and automatically enter Valet mode,

regardless of whether system is pro-

grammed to passively or actively arm.

Code Learning Mode: If you wish to

‘teach’ the system different remote con-

trols:

1. Make sure system is disarmed or in

valet mode,

2. Turn ignition switch on 3 times within

5 seconds and leave in the on position

(ON, OFF, ON , OFF, and ON), you will

hear one chirp from the siren, LED will

flash one time,

3. Within 5 seconds press and hold

valet/override switch for approximately 5

seconds, you will hear a series of chirps

and LED will turn on solid,

4. Release the valet switch, and within 5

seconds you must press all of the arming

buttons on all Transmitters that you

desire to operate the system. You will

hear a chirp after the system has learned

each remote control. The system will

hold 3 different codes in memory.

NOTE: Once you enter the code learn-

ing mode, the system will throw out any

previous programmed remotes. If you are

programming two remotes with the same

code, the system will acknowledge only

the first remote. Even though both

remotes will operate the system.

Multi Car Operation: If you are using

a remote to control two vehicles (the

second button to operate the second

vehicle) Button #2 will only operate

arming and disarming features on the sec-

ond vehicle only. 2nd and 3 rd Auxiliary

channels will not function. Since the trans-

mitter is 3 channel, you could operate up

to three different vehicles with a single

remote. (Buttons 1, 2 and 3)

1 2 3 4 5 6 7 8 9 ... 15 16

Komentarze do niniejszej Instrukcji

Brak uwag